Language:
Format:

Packaging and distributing software

Red Hat Enterprise Linux 9

Packaging software by using the RPM package management system

Red Hat Customer Content Services

Résumé

Package software into an RPM package by using the RPM package manager. Prepare source code for packaging, package software, and investigate advanced packaging scenarios, such as packaging Python projects or RubyGems into RPM packages.

Rendre l'open source plus inclusif

Red Hat s'engage à remplacer les termes problématiques dans son code, sa documentation et ses propriétés Web. Nous commençons par ces quatre termes : master, slave, blacklist et whitelist. En raison de l'ampleur de cette entreprise, ces changements seront mis en œuvre progressivement au cours de plusieurs versions à venir. Pour plus de détails, voir le message de notre directeur technique Chris Wright.

Fournir un retour d'information sur la documentation de Red Hat

Nous apprécions vos commentaires sur notre documentation. Faites-nous savoir comment nous pouvons l'améliorer.

Soumettre des commentaires sur des passages spécifiques

Consultez la documentation au format Multi-page HTML et assurez-vous que le bouton Feedback apparaît dans le coin supérieur droit après le chargement complet de la page.
Utilisez votre curseur pour mettre en évidence la partie du texte que vous souhaitez commenter.
Cliquez sur le bouton Add Feedback qui apparaît près du texte en surbrillance.
Ajoutez vos commentaires et cliquez sur Submit.

Soumettre des commentaires via Bugzilla (compte requis)

Connectez-vous au site Web de Bugzilla.
Sélectionnez la version correcte dans le menu Version.
Saisissez un titre descriptif dans le champ Summary.
Saisissez votre suggestion d'amélioration dans le champ Description. Incluez des liens vers les parties pertinentes de la documentation.
Cliquez sur Submit Bug.

Chapitre 1. Getting started with RPM packaging

The RPM Package Manager (RPM) is a package management system that runs on Red Hat Enterprise Linux, CentOS, and Fedora. You can use RPM to distribute, manage, and update software that you create for any of the operating systems mentioned above.

The RPM package management system brings several advantages over distribution of software in conventional archive files.

RPM enables you to:

Install, reinstall, remove, upgrade and verify packages with standard package management tools, such as DNF or PackageKit.
Use a database of installed packages to query and verify packages.
Use metadata to describe packages, their installation instructions, and other package parameters.
Package software sources, patches and complete build instructions into source and binary packages.
Add packages to DNF repositories.
Digitally sign your packages by using GNU Privacy Guard (GPG) signing keys.

Chapitre 2. Preparing software for RPM packaging

This section explains how to prepare software for RPM packaging. To do so, knowing how to code is not necessary. However, you need to understand the basic concepts, such as What is source code and How programs are made.

2.1. What is source code

This part explains what is source code and shows example source codes of a program written in three different programming languages.

Source code is human-readable instructions to the computer, which describe how to perform a computation. Source code is expressed using a programming language.

This document features three versions of the Hello World program written in three different programming languages:

Hello World written in bash
Hello World written in Python
Hello World written in C

Each version is packaged differently.

These versions of the Hello World program cover the three major use cases of an RPM packager.

Exemple 2.1. Hello World written in bash

The bello project implements Hello World in bash. The implementation only contains the bello shell script. The purpose of the program is to output Hello World on the command line.

The bello file has the following syntax:

#!/bin/bash

printf "Hello World\n"

Exemple 2.2. Hello World written in Python

The pello project implements Hello World in Python. The implementation only contains the pello.py program. The purpose of the program is to output Hello World on the command line.

The pello.py file has the following syntax:

#!/usr/bin/python3

print("Hello World")

Exemple 2.3. Hello World written in C

The cello project implements Hello World in C. The implementation only contains the cello.c and the Makefile files, so the resulting tar.gz archive will have two files apart from the LICENSE file.

The purpose of the program is to output Hello World on the command line.

The cello.c file has the following syntax:

#include <stdio.h>

int main(void) {
    printf("Hello World\n");
    return 0;
}

2.2. How programs are made

Methods of conversion from human-readable source code to machine code (instructions that the computer follows to execute the program) include the following:

The program is natively compiled.
The program is interpreted by raw interpreting.
The program is interpreted by byte compiling.

2.2.1. Natively Compiled Code

Natively compiled software is software written in a programming language that compiles to machine code with a resulting binary executable file. Such software can be run stand-alone.

RPM packages built this way are architecture-specific.

If you compile such software on a computer that uses a 64-bit (x86_64) AMD or Intel processor, it does not execute on a 32-bit (x86) AMD or Intel processor. The resulting package has architecture specified in its name.

2.2.2. Interpreted Code

Some programming languages, such as bash or Python, do not compile to machine code. Instead, their programs' source code is executed step by step, without prior transformations, by a Language Interpreter or a Language Virtual Machine.

Software written entirely in interpreted programming languages is not architecture-specific. Hence, the resulting RPM Package has the noarch string in its name.

Interpreted languages are either Raw-interpreted programs or Byte-compiled programs. These two types differ in program build process and in packaging procedure.

2.2.2.1. Raw-interpreted programs

Raw-interpreted language programs do not need to be compiled and are directly executed by the interpreter.

2.2.2.2. Byte-compiled programs

Byte-compiled languages need to be compiled into byte code, which is then executed by the language virtual machine.

Note

Some languages offer a choice: they can be raw-interpreted or byte-compiled.

2.3. Building software from source

For software written in compiled languages, the source code goes through a build process, producing machine code. This process, commonly called compiling or translating, varies for different languages. The resulting built software can be run, which makes the computer perform the task specified by the programmer.

For software written in raw interpreted languages, the source code is not built, but executed directly.

For software written in byte-compiled interpreted languages, the source code is compiled into byte code, which is then executed by the language virtual machine.

The following subchapters describe how to build software from source code.

2.4. Building software from Natively Compiled Code

This section shows how to build the cello.c program written in the C language into an executable.

cello.c

#include <stdio.h>

int main(void) {
    printf("Hello World\n");
    return 0;
}

2.4.1. Manual building

If you want to build the cello.c program manually, use this procedure:

Procédure

Invoke the C compiler from the GNU Compiler Collection to compile the source code into binary:
```
gcc -g -o cello cello.c
```
Execute the resulting output binary cello:
```
$ ./cello
Hello World
```

2.4.2. Automated building

Large-scale software commonly uses automated building that is done by creating the Makefile file and then running the GNU make utility.

If you want to use the automated building to build the cello.c program, use this procedure:

Procédure

To set up automated building, create the Makefile file with the following content in the same directory as cello.c.
Makefile
```
cello:
	gcc -g -o cello cello.c
clean:
	rm cello
```
Note that the lines under cello: and clean: must begin with a tab space.
To build the software, run the make command:
```
$ make
make: 'cello' is up to date.
```
Since there is already a build available, run the make clean command, and after run the make command again:
```
$ make clean
rm cello

$ make
gcc -g -o cello cello.c
```
Note
Trying to build the program after another build has no effect.
```
$ make
make: 'cello' is up to date.
```
Execute the program:
```
$ ./cello
Hello World
```

You have now compiled a program both manually and using a build tool.

2.5. Interpreting code

This section shows how to byte-compile a program written in Python and raw-interpret a program written in bash.

Note

In the two examples below, the #! line at the top of the file is known as a shebang, and is not part of the programming language source code.

The shebang enables using a text file as an executable: the system program loader parses the line containing the shebang to get a path to the binary executable, which is then used as the programming language interpreter. The functionality requires the text file to be marked as executable.

2.5.1. Byte-compiling code

This section shows how to compile the pello.py program written in Python into byte code, which is then executed by the Python language virtual machine.

Python source code can also be raw-interpreted, but the byte-compiled version is faster. Hence, RPM Packagers prefer to package the byte-compiled version for distribution to end users.

pello.py

#!/usr/bin/python3

print("Hello World")

Procedure for byte-compiling programs varies depending on the following factors:

Programming language
Language’s virtual machine
Tools and processes used with that language

Note

Python is often byte-compiled, but not in the way described here. The following procedure aims not to conform to the community standards, but to be simple. For real-world Python guidelines, see Software Packaging and Distribution.

Use this procedure to compile pello.py into byte code:

Procédure

Byte-compile the pello.py file:

$ python -m compileall pello.py

$ file pello.pyc
pello.pyc: python 2.7 byte-compiled

Execute the byte code in pello.pyc:
```
$ python pello.pyc
Hello World
```

2.5.2. Raw-interpreting code

This section shows how to raw-interpret the bello program written in the bash shell built-in language.

bello

#!/bin/bash

printf "Hello World\n"

Programs written in shell scripting languages, like bash, are raw-interpreted.

Procédure

Make the file with source code executable and run it:
```
$ chmod +x bello
$ ./bello
Hello World
```

2.6. Patching software

In RPM packaging, instead of modifying the original source code, we keep it, and use patches on it.

A patch is a source code that updates other source code. It is formatted as a diff, because it represents what is different between two versions of the text. A diff is created using the diff utility, which is then applied to the source code using the patch utility.

Note

Software developers often use Version Control Systems such as git to manage their code base. Such tools provide their own methods of creating diffs or patching software.

This section explains how to patch the software.

The following example shows how to create a patch from the original source code using diff, and how to apply the patch using patch. Patching is used in a later section when creating an RPM.

This procedure shows how to create a patch from the original source code for cello.c.

Procédure

Preserve the original source code:
```
$ cp -p cello.c cello.c.orig
```
The -p option is used to preserve mode, ownership, and timestamps.

Modify cello.c as needed:

#include <stdio.h>

int main(void) {
    printf("Hello World from my very first patch!\n");
    return 0;
}

Generate a patch using the diff utility:
```
$ diff -Naur cello.c.orig cello.c
--- cello.c.orig        2016-05-26 17:21:30.478523360 -0500
+ cello.c     2016-05-27 14:53:20.668588245 -0500
@@ -1,6 +1,6 @@
 #include<stdio.h>

 int main(void){
-    printf("Hello World!\n");
+    printf("Hello World from my very first patch!\n");
     return 0;
 }
\ No newline at end of file
```
Lines starting with a - are removed from the original source code and replaced with the lines that start with +.
Using the Naur options with the diff command is recommended because it fits the majority of usual use cases. However, in this particular case, only the -u option is necessary. Particular options ensure the following:
- -N (or --new-file) - Handles absent files as if they were empty files.
- -a (or --text) - Treats all files as text. As a result, the files that diff classifies as binaries are not ignored.
- -u (or -U NUM or --unified[=NUM]) - Returns output in the form of output NUM (default 3) lines of unified context. This is an easily readable format that allows fuzzy matching when applying the patch to a changed source tree.
- -r (or --recursive) - Recursively compares any subdirectories that are found.
  For more information on common arguments for the diff utility, see the diff manual page.

Save the patch to a file:

$ diff -Naur cello.c.orig cello.c > cello-output-first-patch.patch

Restore the original cello.c:
```
$ cp cello.c.orig cello.c
```
The original cello.c must be retained, because when an RPM is built, the original file is used, not the modified one. For more information, see Working with SPEC files.

The following procedure shows how to patch cello.c using cello-output-first-patch.patch, build the patched program, and run it.

Procédure

Redirect the patch file to the patch command:

$ patch < cello-output-first-patch.patch
patching file cello.c

Check that the contents of cello.c now reflect the patch:

$ cat cello.c
#include<stdio.h>

int main(void){
    printf("Hello World from my very first patch!\n");
    return 1;
}

Build and run the patched cello.c:

$ make clean
rm cello

$ make
gcc -g -o cello cello.c

$ ./cello
Hello World from my very first patch!

2.7. Arbitrary artifacts

Unix-like systems use the Filesystem Hierarchy Standard (FHS) to specify a directory suitable for a particular file.

Files installed from the RPM packages are placed according to FHS. For example, an executable file should go into a directory that is in the system $PATH variable.

In the context of this documentation, an Arbitrary Artifact is anything installed from an RPM to the system. For RPM and for the system it can be a script, a binary compiled from the package’s source code, a pre-compiled binary, or any other file.

The following sections describe two common ways of placing Arbitrary Artifacts in the system:

Using the install command
Using the make install command

2.8. Placing arbitrary artifacts in the system using the install command

Packagers often use the install command in cases when build automation tooling such as GNU make is not optimal; for example if the packaged program does not need extra overhead.

The install command is provided to the system by coreutils, which places the artifact to the specified directory in the file system with a specified set of permissions.

The following procedure uses the bello file that was previously created as the arbitrary artifact as a subject to this installation method.

Procédure

Run the install command to place the bello file into the /usr/bin directory with permissions common for executable scripts:
```
$ sudo install -m 0755 bello /usr/bin/bello
```
As a result, bello is now located in the directory that is listed in the $PATH variable.
Execute bello from any directory without specifying its full path:
```
$ cd ~

$ bello
Hello World
```

2.9. Placing arbitrary artifacts in the system using the make install command

Using the make install command is an automated way to install built software to the system. In this case, you need to specify how to install the arbitrary artifacts to the system in the Makefile that is usually written by the developer.

This procedure shows how to install a build artifact into a chosen location on the system.

Procédure

Add the install section to the Makefile:
Makefile
```
cello:
	gcc -g -o cello cello.c

clean:
	rm cello

install:
	mkdir -p $(DESTDIR)/usr/bin
	install -m 0755 cello $(DESTDIR)/usr/bin/cello
```
Note that the lines under cello:, clean:, and install: must begin with a tab space.
Note
The $(DESTDIR) variable is a GNU make built-in and is commonly used to specify installation to a directory different than the root directory.
Now you can use Makefile not only to build software, but also to install it to the target system.
Build and install the cello.c program:
```
$ make
gcc -g -o cello cello.c

$ sudo make install
install -m 0755 cello /usr/bin/cello
```
As a result, cello is now located in the directory that is listed in the $PATH variable.
Execute cello from any directory without specifying its full path:
```
$ cd ~

$ cello
Hello World
```

2.10. Preparing source code for packaging

Developers often distribute software as compressed archives of source code, which are then used to create packages. RPM packagers work with a ready source code archive.

Software should be distributed with a software license.

This procedure uses the GPLv3 license text as an example content of the LICENSE file.

Procédure

Create a LICENSE file, and make sure that it includes the following content:

$ cat /tmp/LICENSE
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

Ressources supplémentaires

The code created in this section

2.11. Putting source code into tarball

This section describes how to put each of the three Hello World programs introduced in section "What is source code" into a gzip-compressed tarball, which is a common way to release the software to be later packaged for distribution.

Exemple 2.4. Putting the bello project into tarball

The bello project implements Hello World in bash. The implementation only contains the bello shell script, so the resulting tar.gz archive will have only one file apart from the LICENSE file.

This procedure shows how to prepare the bello project for distribution.

Conditions préalables

Considering that this is version 0.1 of the program.

Procédure

Put all required files into a single directory:

$ mkdir /tmp/bello-0.1

$ mv ~/bello /tmp/bello-0.1/

$ cp /tmp/LICENSE /tmp/bello-0.1/

Create the archive for distribution and move it to the ~/rpmbuild/SOURCES/ directory, which is the default directory where the rpmbuild command stores the files for building packages:
```
$ cd /tmp/

$ tar -cvzf bello-0.1.tar.gz bello-0.1
bello-0.1/
bello-0.1/LICENSE
bello-0.1/bello

$ mv /tmp/bello-0.1.tar.gz ~/rpmbuild/SOURCES/
```

For more information about the example source code written in bash, see Hello World written in bash.

Exemple 2.5. Putting the pello project into tarball

The pello project implements Hello World in Python. The implementation only contains the pello.py program, so the resulting tar.gz archive will have only one file apart from the LICENSE file.

This procedure shows how to prepare the pello project for distribution.

Conditions préalables

Considering that this is version 0.1.1 of the program.

Procédure

Put all required files into a single directory:

$ mkdir /tmp/pello-0.1.2

$ mv ~/pello.py /tmp/pello-0.1.2/

$ cp /tmp/LICENSE /tmp/pello-0.1.2/

Create the archive for distribution and move it to the ~/rpmbuild/SOURCES/ directory, which is the default directory where the rpmbuild command stores the files for building packages:
```
$ cd /tmp/

$ tar -cvzf pello-0.1.2.tar.gz pello-0.1.2
pello-0.1.2/
pello-0.1.2/LICENSE
pello-0.1.2/pello.py

$ mv /tmp/pello-0.1.2.tar.gz ~/rpmbuild/SOURCES/
```

For more information about the example source code written in Python, see Hello World written in Python.

Exemple 2.6. Putting the cello project into tarball

Note that the patch file is not distributed in the archive with the program. The RPM Packager applies the patch when the RPM is built. The patch will be placed into the ~/rpmbuild/SOURCES/ directory alongside the .tar.gz archive.

This procedure shows how to prepare the cello project for distribution.

Conditions préalables

Considering that this is version 1.0 of the program.

Procédure

Put all required files into a single directory:

$ mkdir /tmp/cello-1.0

$ mv ~/cello.c /tmp/cello-1.0/

$ mv ~/Makefile /tmp/cello-1.0/

$ cp /tmp/LICENSE /tmp/cello-1.0/

Create the archive for distribution and move it to the ~/rpmbuild/SOURCES/ directory, which is the default directory where the rpmbuild command stores the files for building packages:
```
$ cd /tmp/

$ tar -cvzf cello-1.0.tar.gz cello-1.0
cello-1.0/
cello-1.0/Makefile
cello-1.0/cello.c
cello-1.0/LICENSE

$ mv /tmp/cello-1.0.tar.gz ~/rpmbuild/SOURCES/
```

Add the patch:

$ mv ~/cello-output-first-patch.patch ~/rpmbuild/SOURCES/

For more information about the example source code written in C, see Hello World written in C.

Chapitre 3. Packaging software

This section explains the basics of RPM packaging.

3.1. Paquets RPM

Un paquetage RPM est un fichier contenant d'autres fichiers et leurs métadonnées (informations sur les fichiers nécessaires au système).

Plus précisément, un paquetage RPM se compose de l'archive cpio.

L'archive cpio contient :

Dossiers
En-tête RPM (métadonnées du paquet)
Le gestionnaire de paquets rpm utilise ces métadonnées pour déterminer les dépendances, l'endroit où installer les fichiers et d'autres informations.

Types de paquets RPM

Il existe deux types de paquets RPM. Les deux types partagent le format de fichier et l'outillage, mais ont des contenus différents et servent des objectifs différents :

Source RPM (SRPM)
Un SRPM contient le code source et un fichier SPEC, qui décrit comment construire le code source en un RPM binaire. En option, les correctifs du code source sont également inclus.
RPM binaire
Un RPM binaire contient les binaires construits à partir des sources et des correctifs.

3.2. Listing RPM packaging tool’s utilities

The following procedure describes how to list the utilities provided by the rpmdevtools package.

Conditions préalables

You installed the rpmdevtools package, which provides several utilities for packaging RPMs:
```
# dnf install rpmdevtools
```

Procédure

List RPM packaging tool’s utilities:
```
$ rpm -ql rpmdevtools | grep bin
```

For more information on the above utilities, see their manual pages or help dialogs.

3.3. Setting up RPM packaging workspace

This section describes how to set up a directory layout that is the RPM packaging workspace by using the rpmdev-setuptree utility.

Conditions préalables

You installed the rpmdevtools package, which provides several utilities for packaging RPMs:
```
# dnf install rpmdevtools
```

Procédure

Run the rpmdev-setuptree utility:

$ rpmdev-setuptree

$ tree ~/rpmbuild/
/home/user/rpmbuild/
|-- BUILD
|-- RPMS
|-- SOURCES
|-- SPECS
`-- SRPMS

5 directories, 0 files

The created directories serve the following purposes:

Annuaire	Objectif
BUILD	When packages are built, various `%buildroot` directories are created here. This is useful for investigating a failed build if the logs output do not provide enough information.
RPMS	Binary RPMs are created here, in subdirectories for different architectures, for example in subdirectories `x86_64` and `noarch`.
SOURCES	Here, the packager puts compressed source code archives and patches. The `rpmbuild` command looks for them here.
SPECS	The packager puts SPEC files here.
SRPMS	When `rpmbuild` is used to build an SRPM instead of a binary RPM, the resulting SRPM is created here.

3.4. What is a SPEC file

You can understand a SPEC file as a recipe that the rpmbuild utility uses to build an RPM. A SPEC file provides necessary information to the build system by defining instructions in a series of sections. The sections are defined in the Preamble and the Body part. The Preamble part contains a series of metadata items that are used in the Body part. The Body part represents the main part of the instructions.

The following sections describe each section of a SPEC file.

3.4.1. Preamble items

The table below presents some of the directives that are used frequently in the Preamble section of the RPM SPEC file.

Tableau 3.1. Items used in the Preamble section of the RPM SPEC file

SPEC Directive	Définition
`Name`	The base name of the package, which should match the SPEC file name.
`Version`	The upstream version number of the software.
`Release`	The number of times this version of the software was released. Normally, set the initial value to 1%{?dist}, and increment it with each new release of the package. Reset to 1 when a new `Version` of the software is built.
`Summary`	A brief, one-line summary of the package.
`License`	The license of the software being packaged.
`URL`	The full URL for more information about the program. Most often this is the upstream project website for the software being packaged.
`Source0`	Path or URL to the compressed archive of the upstream source code (unpatched, patches are handled elsewhere). This should point to an accessible and reliable storage of the archive, for example, the upstream page and not the packager’s local storage. If needed, more SourceX directives can be added, incrementing the number each time, for example: Source1, Source2, Source3, and so on.
`Patch`	The name of the first patch to apply to the source code if necessary. The directive can be applied in two ways: with or without numbers at the end of Patch. If no number is given, one is assigned to the entry internally. It is also possible to give the numbers explicitly using Patch0, Patch1, Patch2, Patch3, and so on. These patches can be applied one by one using the %patch0, %patch1, %patch2 macro and so on. The macros are applied within the %prep directive in the Body section of the RPM SPEC file. Alternatively, you can use the %autopatch macro which automatically applies all patches in the order they are given in the SPEC file.
`BuildArch`	If the package is not architecture dependent, for example, if written entirely in an interpreted programming language, set this to `BuildArch: noarch`. If not set, the package automatically inherits the Architecture of the machine on which it is built, for example `x86_64`.
`BuildRequires`	A comma or whitespace-separated list of packages required for building the program written in a compiled language. There can be multiple entries of `BuildRequires`, each on its own line in the SPEC file.
`Requires`	A comma- or whitespace-separated list of packages required by the software to run once installed. There can be multiple entries of `Requires`, each on its own line in the SPEC file.
`ExcludeArch`	If a piece of software can not operate on a specific processor architecture, you can exclude that architecture here.
`Conflicts`	`Conflicts` are inverse to `Requires`. If there is a package matching `Conflicts`, the package cannot be installed independently on whether the `Conflict` tag is on the package that has already been installed or on a package that is going to be installed.
`Obsoletes`	This directive alters the way updates work depending on whether the `rpm` command is used directly on the command line or the update is performed by an updates or dependency solver. When used on a command line, RPM removes all packages matching obsoletes of packages being installed. When using an update or dependency resolver, packages containing matching `Obsoletes:` are added as updates and replace the matching packages.
`Provides`	If `Provides` is added to a package, the package can be referred to by dependencies other than its name.

The Name, Version, and Release directives comprise the file name of the RPM package. RPM package maintainers and system administrators often call these three directives N-V-R or NVR, because RPM package filenames have the NAME-VERSION-RELEASE format.

The following example shows how to obtain the NVR information for a specific package by querying the rpm command.

Exemple 3.1. Querying rpm to provide the NVR information for the bash package

# rpm -q bash
bash-4.4.19-7.el8.x86_64

Here, bash is the package name, 4.4.19 is the version, and 7.el8 is the release. The final marker is x86_64, which signals the architecture. Unlike the NVR, the architecture marker is not under direct control of the RPM packager, but is defined by the rpmbuild build environment. The exception to this is the architecture-independent noarch package.

3.4.2. Body items

The items used in the Body section of the RPM SPEC file are listed in the table below.

Tableau 3.2. Items used in the Body section of the RPM SPEC file

SPEC Directive	Définition
`%description`	A full description of the software packaged in the RPM. This description can span multiple lines and can be broken into paragraphs.
`%prep`	Command or series of commands to prepare the software to be built, for example, unpacking the archive in `Source0`. This directive can contain a shell script.
`%build`	Command or series of commands for building the software into machine code (for compiled languages) or byte code (for some interpreted languages).
`%install`	Command or series of commands for copying the desired build artifacts from the `%builddir` (where the build happens) to the `%buildroot` directory (which contains the directory structure with the files to be packaged). This usually means copying files from `~/rpmbuild/BUILD` to `~/rpmbuild/BUILDROOT` and creating the necessary directories in `~/rpmbuild/BUILDROOT`. This is only run when creating a package, not when the end-user installs the package. See Working with SPEC files for details.
`%check`	Command or series of commands to test the software. This normally includes things such as unit tests.
`%files`	The list of files that will be insstalled in the end user’s system.
`%changelog`	A record of changes that have happened to the package between different `Version` or `Release` builds.

3.4.3. Advanced items

The SPEC file can also contain advanced items, such as Scriptlets

or Triggers.

They take effect at different points during the installation process on the end user’s system, not the build process.

3.5. BuildRoots

In the context of RPM packaging, buildroot is a chroot environment. This means that the build artifacts are placed here using the same file system hierarchy as the future hierarchy in the end user’s system, with buildroot acting as the root directory. The placement of build artifacts should comply with the file system hierarchy standard of the end user’s system.

The files in buildroot are later put into a cpio archive, which becomes the main part of the RPM. When RPM is installed on the end user’s system, these files are extracted in the root directory, preserving the correct hierarchy.

Note

Starting from Red Hat Enterprise Linux 6, the rpmbuild program has its own defaults. Overriding these defaults leads to several problems; hence, Red Hat does not recommend to define your own value of this macro. You can use the %{buildroot} macro with the defaults from the rpmbuild directory.

3.6. RPM macros

An rpm macro is a straight text substitution that can be conditionally assigned based on the optional evaluation of a statement when certain built-in functionality is used. Hence, RPM can perform text substitutions for you.

An example use is referencing the packaged software Version multiple times in a SPEC file. You define Version only once in the %{version} macro, and use this macro throughout the SPEC file. Every occurrence will be automatically substituted by Version that you defined previously.

Note

If you see an unfamiliar macro, you can evaluate it with the following command:

$ rpm --eval %{_MACRO}

Evaluating the %{_bindir} and the %{_libexecdir} macros

$ rpm --eval %{_bindir}
/usr/bin

$ rpm --eval %{_libexecdir}
/usr/libexec

One of the commonly-used macros is the %{?dist} macro, which signals which distribution is used for the build (distribution tag).

# On a RHEL 9.x machine
$ rpm --eval %{?dist}
.el8

3.7. Working with SPEC files

To package new software, you need to create a new SPEC file.

There are two ways to achieve this:

Writing the new SPEC file manually from scratch
Use the rpmdev-newspec utility
This utility creates an unpopulated SPEC file, and you fill in the necessary directives and fields.

Note

Some programmer-focused text editors pre-populate a new .spec file with their own SPEC template. The rpmdev-newspec utility provides an editor-agnostic method.

The following sections use the three example implementations of the Hello World! program that were described in What is source code.

Each of the programs is also fully described in the table below.

Software Name	Explanation of example
bello	A program written in a raw interpreted programming language. It demonstrates when the source code does not need to be built, but only needs to be installed. If a pre-compiled binary needs to be packaged, you can also use this method since the binary would also just be a file.
pello	A program written in a byte-compiled interpreted programming language. It demonstrates byte-compiling the source code and installating the bytecode - the resulting pre-optimized files.
cello	A program written in a natively compiled programming language. It demonstrates a common process of compiling the source code into machine code and installing the resulting executables.

The implementations of Hello World! are:

bello-0.1.tar.gz

As a prerequisite, these implementations need to be placed into the ~/rpmbuild/SOURCES directory.

3.8. Creating a new SPEC file with rpmdev-newspec

The following procedure shows how to create a SPEC file for each of the three aforementioned Hello World! programs using the rpmdev-newspec utility.

Procédure

Change to the ~/rpmbuild/SPECS directory and use the rpmdev-newspec utility:

$ cd ~/rpmbuild/SPECS

$ rpmdev-newspec bello
bello.spec created; type minimal, rpm version >= 4.11.

$ rpmdev-newspec cello
cello.spec created; type minimal, rpm version >= 4.11.

$ rpmdev-newspec pello
pello.spec created; type minimal, rpm version >= 4.11.

The ~/rpmbuild/SPECS/ directory now contains three SPEC files named bello.spec, cello.spec, and pello.spec.

Examine the files:
The directives in the files represent those described in What is a SPEC file.

In the following sections, you will populate particular section in the output files of rpmdev-newspec.

Note

The rpmdev-newspec utility does not use guidelines or conventions specific to any particular Linux distribution. However, this document targets Red Hat Enterprise Linux, so the %{buildroot} notation is preferred over the $RPM_BUILD_ROOT notation when referencing RPM’s Buildroot for consistency with all other defined or provided macros throughout the SPEC file.

3.9. Modifying an original SPEC file for creating RPMs

The following procedure shows how to modify the output SPEC file provided by rpmdev-newspec for creating the RPMs.

Conditions préalables

The source code of the particular program has been placed into the ~/rpmbuild/SOURCES/ directory.
The unpopulated SPEC file ~/rpmbuild/SPECS/<name>.spec file has been created by the rpmdev-newspec utility.

Procédure

Open the output template of the ~/rpmbuild/SPECS/<name>.spec file provided by the rpmdev-newspec utility:
Populate the first section of the SPEC file:
The first section includes these directives that rpmdev-newspec grouped together:
Name
The Name was already specified as an argument to rpmdev-newspec.
Version
Set the Version to match the upstream release version of the source code.
Release
The Release is automatically set to 1%{?dist}, which is initially 1. Increment the initial value whenever updating the package without a change in the upstream release Version - such as when including a patch. Reset Release to 1 when a new upstream release happens.
Summary
The Summary is a short, one-line explanation of what this software is.
Populate the License, URL, and Source0 directives:
The License field is the Software License associated with the source code from the upstream release. The exact format for how to label the License in your SPEC file will vary depending on which specific RPM based Linux distribution guidelines you are following.
For example, you can use GPLv3+.
The URL field provides URL to the upstream software website. For consistency, utilize the RPM macro variable of %{name}, and use https://example.com/%{name}.
The Source0 field provides URL to the upstream software source code. It should link directly to the specific version of software that is being packaged. Note that the example URLs given in this documentation include hard-coded values that are possible subject to change in the future. Similarly, the release version can change as well. To simplify these potential future changes, use the %{name} and %{version} macros. By using these, you need to update only one field in the SPEC file.
Populate the BuildRequires, Requires and BuildArch directives:
BuildRequires specifies build-time dependencies for the package.
Requires specifies run-time dependencies for the package.
This is a software written in an interpreted programming language with no natively compiled extensions. Hence, add the BuildArch directive with the noarch value. This tells RPM that this package does not need to be bound to the processor architecture on which it is built.
Populate the %description, %prep, %build, %install, %files, and %license directives:
These directives can be thought of as section headings, because they are directives that can define multi-line, multi-instruction, or scripted tasks to occur.
The %description is a longer, fuller description of the software than Summary, containing one or more paragraphs.
The %prep section specifies how to prepare the build environment. This usually involves expansion of compressed archives of the source code, application of patches, and, potentially, parsing of information provided in the source code for use in a later portion of the SPEC file. In this section you can use the built-in %setup -q macro.
The %build section specifies how to build the software.
The %install section contains instructions for rpmbuild on how to install the software, once it has been built, into the BUILDROOT directory.
This directory is an empty chroot base directory, which resembles the end user’s root directory. Here you can create any directories that will contain the installed files. To create such directories, you can use the RPM macros without having to hardcode the paths.
The %files section specifies the list of files provided by this RPM and their full path location on the end user’s system.
Within this section, you can indicate the role of various files using built-in macros. This is useful for querying the package file manifest metadata using the rpm command. For example, to indicate that the LICENSE file is a software license file, use the %license macro.
The last section, %changelog, is a list of datestamped entries for each Version-Release of the package. They log packaging changes, not software changes. Examples of packaging changes: adding a patch, changing the build procedure in the %build section.
Follow this format for the first line:
Start with an * character followed by Day-of-Week Month Day Year Name Surname <email> - Version-Release
Follow this format for the actual change entry:
- Each change entry can contain multiple items, one for each change.
- Each item starts on a new line.
- Each item begins with a - character.

You have now written an entire SPEC file for the required program.

Ressources supplémentaires

An example SPEC file for a program written in bash
An example SPEC file for a program written in Python
An example SPEC file for a program written in C
Building RPMs

3.10. An example SPEC file for a program written in bash

This section shows an example SPEC file for the bello program that was written in bash.

An example SPEC file for the bello program written in bash

Name:           bello
Version:        0.1
Release:        1%{?dist}
Summary:        Hello World example implemented in bash script

License:        GPLv3+
URL:            https://www.example.com/%{name}
Source0:        https://www.example.com/%{name}/releases/%{name}-%{version}.tar.gz

Requires:       bash

BuildArch:      noarch

%description
The long-tail description for our Hello World Example implemented in
bash script.

%prep
%setup -q

%build

%install

mkdir -p %{buildroot}/%{_bindir}

install -m 0755 %{name} %{buildroot}/%{_bindir}/%{name}

%files
%license LICENSE
%{_bindir}/%{name}

%changelog
* Tue May 31 2016 Adam Miller <maxamillion@fedoraproject.org> - 0.1-1
- First bello package
- Example second item in the changelog for version-release 0.1-1

The BuildRequires directive, which specifies build-time dependencies for the package, was deleted because there is no building step for bello. Bash is a raw interpreted programming language, and the files are just installed to their location on the system.

The Requires directive, which specifies run-time dependencies for the package, include only bash, because the bello script requires only the bash shell environment to execute.

The %build section, which specifies how to build the software, is blank, because a bash does not need to be built.

For installing bello you only need to create the destination directory and install the executable bash script file there. Hence, you can use the install command in the %install section. RPM macros allow to do this without hardcoding paths.

Ressources supplémentaires

What is source code

3.11. An example SPEC file for a program written in Python

This section shows an example SPEC file for the pello program written in the Python programming language.

An example SPEC file for the pello program written in Python

Name:           python-pello
Version:        1.0.2
Release:        1%{?dist}
Summary:        Example Python library

License:        MIT
URL:            https://github.com/fedora-python/Pello
Source:         %{url}/archive/v%{version}/Pello-%{version}.tar.gz

BuildArch:      noarch
BuildRequires:  python3-devel

# Build dependencies needed to be specified manually
BuildRequires:  python3-setuptools

# Test dependencies needed to be specified manually
# Also runtime dependencies need to be BuildRequired manually to run tests during build
BuildRequires:  python3-pytest >= 3


%global _description %{expand:
Pello is an example package with an executable that prints Hello World! on the command line.}

%description %_description

%package -n python3-pello
Summary:        %{summary}

%description -n python3-pello %_description


%prep
%autosetup -p1 -n Pello-%{version}


%build
# The macro only supported projects with setup.py
%py3_build


%install
# The macro only supported projects with setup.py
%py3_install


%check
%{pytest}


# Note that there is no %%files section for the unversioned python module
%files -n python3-pello
%doc README.md
%license LICENSE.txt
%{_bindir}/pello_greeting

# The library files needed to be listed manually
%{python3_sitelib}/pello/

# The metadata files needed to be listed manually
%{python3_sitelib}/Pello-*.egg-info/

Ressources supplémentaires

SPEC file description for a Python package
What is source code

3.12. An example SPEC file for a program written in C

This section shows an example SPEC file for the cello program that was written in the C programming language.

An example SPEC file for the cello program written in C

Name:           cello
Version:        1.0
Release:        1%{?dist}
Summary:        Hello World example implemented in C

License:        GPLv3+
URL:            https://www.example.com/%{name}
Source0:        https://www.example.com/%{name}/releases/%{name}-%{version}.tar.gz

Patch0:         cello-output-first-patch.patch

BuildRequires:  gcc
BuildRequires:  make

%description
The long-tail description for our Hello World Example implemented in
C.

%prep
%setup -q

%patch0

%build
make %{?_smp_mflags}

%install
%make_install

%files
%license LICENSE
%{_bindir}/%{name}

%changelog
* Tue May 31 2016 Adam Miller <maxamillion@fedoraproject.org> - 1.0-1
- First cello package

The BuildRequires directive, which specifies build-time dependencies for the package, includes two packages that are needed to perform the compilation build process:

The gcc package
The make package

The Requires directive, which specifies run-time dependencies for the package, is omitted in this example. All runtime requirements are handled by rpmbuild, and the cello program does not require anything outside of the core C standard libraries.

The %build section reflects the fact that in this example a Makefile for the cello program was written, hence the GNU make command provided by the rpmdev-newspec utility can be used. However, you need to remove the call to %configure because you did not provide a configure script.

The installation of the cello program can be accomplished by using the %make_install macro that was provided by the rpmdev-newspec command. This is possible because the Makefile for the cello program is available.

Ressources supplémentaires

What is source code

3.13. Building RPMs

RPMs are built with the rpmbuild command. This command expects a certain directory and file structure, which is the same as the structure that was set up by the rpmdev-setuptree utility.

Different use cases and desired outcomes require different combinations of arguments to the rpmbuild command. The two main use cases are:

Building source RPMs
Building binary RPM
- Rebuilding a binary RPM from a source RPM
- Building a binary RPM from the SPEC file
- Building a binary RPM from a source RPM

This following sections describe how to build an RPM after a SPEC file for a program has been created.

3.14. Building source RPMs

The following procedure describes how to build a source RPM.

Conditions préalables

A SPEC file for the program that we want to package must already exist.

Procédure

Run the rpmbuild command with the specified SPEC file:
```
$ rpmbuild -bs SPECFILE
```
Substitute SPECFILE with the SPEC file. The -bs option stands for the build source.

The following example shows building source RPMs for the bello, pello, and cello projects.

Building source RPMs for bello, pello, and cello.

$ cd ~/rpmbuild/SPECS/

8$ rpmbuild -bs bello.spec
Wrote: /home/admiller/rpmbuild/SRPMS/bello-0.1-1.el8.src.rpm

$ rpmbuild -bs pello.spec
Wrote: /home/admiller/rpmbuild/SRPMS/pello-0.1.2-1.el8.src.rpm

$ rpmbuild -bs cello.spec
Wrote: /home/admiller/rpmbuild/SRPMS/cello-1.0-1.el8.src.rpm

Verification steps

Make sure that the rpmbuild/SRPMS directory includes the resulting source RPMs. The directory is a part of the structure expected by rpmbuild.

Ressources supplémentaires

Working with SPEC files.
Creating a new SPEC file with rpmdev-newspec
Modifying an original SPEC file for creating RPMs

3.15. Rebuilding a binary RPM from a source RPM

The following procedure shows how to rebuild a binary RPM from a source RPM (SRPM).

Procédure

To rebuild bello, pello, and cello from their SRPMs, run:

$ rpmbuild --rebuild ~/rpmbuild/SRPMS/bello-0.1-1.el8.src.rpm
[output truncated]

$ rpmbuild --rebuild ~/rpmbuild/SRPMS/pello-0.1.2-1.el8.src.rpm
[output truncated]

$ rpmbuild --rebuild ~/rpmbuild/SRPMS/cello-1.0-1.el8.src.rpm
[output truncated]

Note

Invoking rpmbuild --rebuild involves:

Installing the contents of the SRPM - the SPEC file and the source code - into the ~/rpmbuild/ directory.
Building using the installed contents.
Removing the SPEC file and the source code.

To retain the SPEC file and the source code after building, you can:

When building, use the rpmbuild command with the --recompile option instead of the --rebuild option.

Install the SRPMs using these commands:

$ rpm -Uvh ~/rpmbuild/SRPMS/bello-0.1-1.el8.src.rpm
Updating / installing…
   1:bello-0.1-1.el8               [100%]

$ rpm -Uvh ~/rpmbuild/SRPMS/pello-0.1.2-1.el8.src.rpm
Updating / installing…
…1:pello-0.1.2-1.el8              [100%]

$ rpm -Uvh ~/rpmbuild/SRPMS/cello-1.0-1.el8.src.rpm
Updating / installing…
…1:cello-1.0-1.el8            [100%]

The output generated when creating a binary RPM is verbose, which is helpful for debugging. The output varies for different examples and corresponds to their SPEC files.

The resulting binary RPMs are in the ~/rpmbuild/RPMS/YOURARCH directory where YOURARCH is your architecture or in the ~/rpmbuild/RPMS/noarch/ directory, if the package is not architecture-specific.

3.16. Building a binary RPM from the SPEC file

The following procedure shows how to build bello, pello, and cello binary RPMs from their SPEC files.

Procédure

Run the rpmbuild command with the bb option:

$ rpmbuild -bb ~/rpmbuild/SPECS/bello.spec

$ rpmbuild -bb ~/rpmbuild/SPECS/pello.spec

$ rpmbuild -bb ~/rpmbuild/SPECS/cello.spec

3.17. Building binary RPMs from source RPMs

It is also possible to build any kind of RPM from a source RPM. To do so, use the following procedure.

Procédure

Run the rpmbuild command with one of the below options and with the source package specified:
```
# rpmbuild {-ra|-rb|-rp|-rc|-ri|-rl|-rs} [rpmbuild-options] SOURCEPACKAGE
```

Ressources supplémentaires

rpmbuild(8) man page

3.18. Checking RPMs for sanity

After creating a package, it is necessary to check the quality of the package.

The main tool for checking package quality is rpmlint.

The rpmlint tool does the following:

Improves RPM maintainability.
Enables sanity checking by performing static analysis of the RPM.
Enables error checking by performing static analysis of the RPM.

The rpmlint tool can check binary RPMs, source RPMs (SRPMs), and SPEC files, so it is useful for all stages of packaging, as shown in the following sections.

Note that rpmlint has very strict guidelines; hence it is sometimes acceptable to skip some of its errors and warnings, as shown in the following examples.

Note

In the examples described in the following sections, rpmlint is run without any options, which produces a non-verbose output. For detailed explanations of each error or warning, you can run rpmlint -i instead.

3.19. Checking bello for sanity

This section shows possible warnings and errors that can occur when checking RPM sanity on the example of the bello SPEC file and bello binary RPM.

3.19.1. Checking the bello SPEC File

Exemple 3.2. Output of running the rpmlint command on the SPEC file for bello

$ rpmlint bello.spec
bello.spec: W: invalid-url Source0: https://www.example.com/bello/releases/bello-0.1.tar.gz HTTP Error 404: Not Found
0 packages and 1 specfiles checked; 0 errors, 1 warnings.

For bello.spec, there is only one warning, which says that the URL listed in the Source0 directive is unreachable. This is expected, because the specified example.com URL does not exist. Presuming that we expect this URL to work in the future, we can ignore this warning.

Exemple 3.3. Output of running the rpmlint command on the SRPM for bello

$ rpmlint ~/rpmbuild/SRPMS/bello-0.1-1.el8.src.rpm
bello.src: W: invalid-url URL: https://www.example.com/bello HTTP Error 404: Not Found
bello.src: W: invalid-url Source0: https://www.example.com/bello/releases/bello-0.1.tar.gz HTTP Error 404: Not Found
1 packages and 0 specfiles checked; 0 errors, 2 warnings.

For the bello SRPM, there is a new warning, which says that the URL specified in the URL directive is unreachable. Assuming the link will be working in the future, we can ignore this warning.

3.19.2. Checking the bello binary RPM

When checking binary RPMs, rpmlint checks for the following items:

Documentation
Manual pages
Consistent use of the filesystem hierarchy standard

Exemple 3.4. Output of running the rpmlint command on the binary RPM for bello

$ rpmlint ~/rpmbuild/RPMS/noarch/bello-0.1-1.el8.noarch.rpm
bello.noarch: W: invalid-url URL: https://www.example.com/bello HTTP Error 404: Not Found
bello.noarch: W: no-documentation
bello.noarch: W: no-manual-page-for-binary bello
1 packages and 0 specfiles checked; 0 errors, 3 warnings.

The no-documentation and no-manual-page-for-binary warnings say that he RPM has no documentation or manual pages, because we did not provide any. Apart from the above warnings, the RPM passed rpmlint checks.

3.20. Checking pello for sanity

This section shows possible warnings and errors that can occur when checking RPM sanity on the example of the pello SPEC file and pello binary RPM.

3.20.1. Checking the pello SPEC File

Exemple 3.5. Output of running the rpmlint command on the SPEC file for pello

$ rpmlint pello.spec
pello.spec:30: E: hardcoded-library-path in %{buildroot}/usr/lib/%{name}
pello.spec:34: E: hardcoded-library-path in /usr/lib/%{name}/%{name}.pyc
pello.spec:39: E: hardcoded-library-path in %{buildroot}/usr/lib/%{name}/
pello.spec:43: E: hardcoded-library-path in /usr/lib/%{name}/
pello.spec:45: E: hardcoded-library-path in /usr/lib/%{name}/%{name}.py*
pello.spec: W: invalid-url Source0: https://www.example.com/pello/releases/pello-0.1.2.tar.gz HTTP Error 404: Not Found
0 packages and 1 specfiles checked; 5 errors, 1 warnings.

The invalid-url Source0 warning says that the URL listed in the Source0 directive is unreachable. This is expected, because the specified example.com URL does not exist. Presuming that this URL will work in the future, you can ignore this warning.

The hardcoded-library-path errors suggest to use the %{_libdir} macro instead of hard-coding the library path. For the sake of this example, you can safely ignore these errors. However, for packages going into production make sure to check all errors carefully.

Exemple 3.6. Output of running the rpmlint command on the SRPM for pello

$ rpmlint ~/rpmbuild/SRPMS/pello-0.1.2-1.el8.src.rpm
pello.src: W: invalid-url URL: https://www.example.com/pello HTTP Error 404: Not Found
pello.src:30: E: hardcoded-library-path in %{buildroot}/usr/lib/%{name}
pello.src:34: E: hardcoded-library-path in /usr/lib/%{name}/%{name}.pyc
pello.src:39: E: hardcoded-library-path in %{buildroot}/usr/lib/%{name}/
pello.src:43: E: hardcoded-library-path in /usr/lib/%{name}/
pello.src:45: E: hardcoded-library-path in /usr/lib/%{name}/%{name}.py*
pello.src: W: invalid-url Source0: https://www.example.com/pello/releases/pello-0.1.2.tar.gz HTTP Error 404: Not Found
1 packages and 0 specfiles checked; 5 errors, 2 warnings.

The new invalid-url URL error here is about the URL directive, which is unreachable. Assuming that the URL will be valid in the future, you can safely ignore this error.

3.20.2. Checking the pello binary RPM

When checking binary RPMs, rpmlint checks for the following items:

Documentation
Manual pages
Consistent use of the Filesystem Hierarchy Standard

Exemple 3.7. Output of running the rpmlint command on the binary RPM for pello

$ rpmlint ~/rpmbuild/RPMS/noarch/pello-0.1.2-1.el8.noarch.rpm
pello.noarch: W: invalid-url URL: https://www.example.com/pello HTTP Error 404: Not Found
pello.noarch: W: only-non-binary-in-usr-lib
pello.noarch: W: no-documentation
pello.noarch: E: non-executable-script /usr/lib/pello/pello.py 0644L /usr/bin/env
pello.noarch: W: no-manual-page-for-binary pello
1 packages and 0 specfiles checked; 1 errors, 4 warnings.

The no-documentation and no-manual-page-for-binary warnings say that the RPM has no documentation or manual pages, because you did not provide any.

The only-non-binary-in-usr-lib warning says that you provided only non-binary artifacts in /usr/lib/. This directory is normally reserved for shared object files, which are binary files. Therefore, rpmlint expects at least one or more files in /usr/lib/ directory to be binary.

This is an example of an rpmlint check for compliance with Filesystem Hierarchy Standard. Normally, use RPM macros to ensure the correct placement of files. For the sake of this example, you can safely ignore this warning.

The non-executable-script error warns that the /usr/lib/pello/pello.py file has no execute permissions. The rpmlint tool expects the file to be executable, because the file contains the shebang. For the purpose of this example, you can leave this file without execute permissions and ignore this error.

Apart from the above warnings and errors, the RPM passed rpmlint checks.

3.21. Checking cello for sanity

This section shows possible warnings and errors that can occur when checking RPM sanity on the example of the cello SPEC file and pello binary RPM.

3.21.1. Checking the cello SPEC File

Exemple 3.8. Output of running the rpmlint command on the SPEC file for cello

$ rpmlint ~/rpmbuild/SPECS/cello.spec
/home/admiller/rpmbuild/SPECS/cello.spec: W: invalid-url Source0: https://www.example.com/cello/releases/cello-1.0.tar.gz HTTP Error 404: Not Found
0 packages and 1 specfiles checked; 0 errors, 1 warnings.

For cello.spec, there is only one warning, which says that the URL listed in the Source0 directive is unreachable. This is expected, because the specified example.com URL does not exist. Presuming that this URL will work in the future, you can ignore this warning.

Exemple 3.9. Output of running the rpmlint command on the SRPM for cello

$ rpmlint ~/rpmbuild/SRPMS/cello-1.0-1.el8.src.rpm
cello.src: W: invalid-url URL: https://www.example.com/cello HTTP Error 404: Not Found
cello.src: W: invalid-url Source0: https://www.example.com/cello/releases/cello-1.0.tar.gz HTTP Error 404: Not Found
1 packages and 0 specfiles checked; 0 errors, 2 warnings.

For the cello SRPM, there is a new warning, which says that the URL specified in the URL directive is unreachable. Assuming the link will be working in the future, you can ignore this warning.

3.21.2. Checking the cello binary RPM

When checking binary RPMs, rpmlint checks for the following items:

Documentation
Manual pages
Consistent use of the filesystem hierarchy standard

Exemple 3.10. Output of running the rpmlint command on the binary RPM for cello

$ rpmlint ~/rpmbuild/RPMS/x86_64/cello-1.0-1.el8.x86_64.rpm
cello.x86_64: W: invalid-url URL: https://www.example.com/cello HTTP Error 404: Not Found
cello.x86_64: W: no-documentation
cello.x86_64: W: no-manual-page-for-binary cello
1 packages and 0 specfiles checked; 0 errors, 3 warnings.

The no-documentation and no-manual-page-for-binary warnings say that he RPM has no documentation or manual pages, because you did not provide any. Apart from the above warnings, the RPM passed rpmlint checks.

3.22. Logging RPM activity to syslog

Any RPM activity or transaction can be logged by the System Logging protocol (syslog).

Conditions préalables

To enable the logging of RPM transactions to syslog, make sure that the syslog plug-in is installed on the system:
```
# dnf install rpm-plugin-syslog
```
Note
The default location for the syslog messages is the /var/log/messages file. However, you can configure syslog to use another location to store the messages.

To see the updates on RPM activity, follow the described procedure.

Procédure

Open the file that you configured to store the syslog messages, or if you use the default syslog configuration, open the /var/log/messages file.
Search for new lines including the [RPM] string.

3.23. Extracting RPM content

In particular cases, for example, if a package required by RPM is damaged, it is necessary to extract the content of the package. In such cases, if an RPM installation is still working despite the damage, you can use the rpm2archive utility to convert an .rpm file to a tar archive to use the content of the package.

Note

If the RPM installation is severely damaged, you can use the rpm2cpio utility to convert the RPM package file to a cpio archive.

The following procedure describes how to convert an rpm payload to a tar archive using the rpm2archive utility.

Procédure

Exécutez la commande suivante :
```
$ rpm2archive filename.rpm
```
Replace filename with the name of the .rpm file.
The resulting file has the .tgz suffix. For example, to archive the bash package:
```
$ rpm2archive bash-4.4.19-6.el8.x86_64.rpm
$ bash-4.4.19-6.el8.x86_64.rpm.tgz
bash-4.4.19-6.el8.x86_64.rpm.tgz
```

Chapitre 4. Advanced topics

This section covers topics that are beyond the scope of the introductory tutorial but are useful in real-world RPM packaging.

4.1. Signing RPM packages

You can sign RPM packages to ensure that no third party can alter their content. To add an additional layer of security, use the HTTPS protocol when downloading the package.

You can sign a package by using the --addsign option provided by the rpm-sign package.

Conditions préalables

You have created a GNU Privacy Guard (GPG) key as described in Creating a GPG key.

4.1.1. Creating a GPG key

Use the following procedure to create a GNU Privacy Guard (GPG) key required for signing packages.

Procédure

Generate a GPG key pair:
```
# gpg --gen-key
```
Check the generated key pair:
```
# gpg --list-keys
```
Exporter la clé publique :
```
# gpg --export -a '<Key_name>' > RPM-GPG-KEY-pmanager
```
Replace <Key_name> with the real key name that you have selected.
Import the exported public key into an RPM database:
```
# rpm --import RPM-GPG-KEY-pmanager
```

4.1.2. Configuring RPM to sign a package

To be able to sign an RPM package, you need to specify the %_gpg_name RPM macro.

The following procedure describes how to configure RPM for signing a package.

Procédure

Define the %_gpg_name macro in your $HOME/.rpmmacros file as follows:
```
%_gpg_name Key ID
```
Replace Key ID with the GNU Privacy Guard (GPG) key ID that you will use to sign a package. A valid GPG key ID value is either a full name or email address of the user who created the key.

4.1.3. Adding a signature to an RPM package

This section describes the most usual case when a package is built without a signature. The signature is added just before the release of the package.

To add a signature to an RPM package, use the --addsign option provided by the rpm-sign package.

Procédure

Add a signature to a package:
```
$ rpm --addsign package-name.rpm
```
Replace package-name with the name of an RPM package you want to sign.
Note
You must enter the password to unlock the secret key for the signature.

4.2. More on macros

This section covers selected built-in RPM Macros. For an exhaustive list of such macros, see RPM Documentation.

4.2.1. Defining your own macros

The following section describes how to create a custom macro.

Procédure

Include the following line in the RPM SPEC file:
```
%global <name>[(opts)] <body>
```

All whitespace surrounding <body> is removed. Name may be composed of alphanumeric characters, and the character _ and must be at least 3 characters in length. Inclusion of the (opts) field is optional:

Simple macros do not contain the (opts) field. In this case, only recursive macro expansion is performed.
Parametrized macros contain the (opts) field. The opts string between parentheses is passed to getopt(3) for argc/argv processing at the beginning of a macro invocation.

Note

Older RPM SPEC files use the %define <name> <body> macro pattern instead. The differences between %define and %global macros are as follows:

%define has local scope. It applies to a specific part of a SPEC file. The body of a %define macro is expanded when used.
%global has global scope. It applies to an entire SPEC file. The body of a %global macro is expanded at definition time.

Important

Macros are evaluated even if they are commented out or the name of the macro is given into the %changelog section of the SPEC file. To comment out a macro, use %%. For example: %%global.

Ressources supplémentaires

Macro syntax

4.2.2. Using the %setup macro

This section describes how to build packages with source code tarballs using different variants of the %setup macro. Note that the macro variants can be combined. The rpmbuild output illustrates standard behavior of the %setup macro. At the beginning of each phase, the macro outputs Executing(%…), as shown in the below example.

Exemple 4.1. Example %setup macro output

Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DhddsG

The shell output is set with set -x enabled. To see the content of /var/tmp/rpm-tmp.DhddsG, use the --debug option because rpmbuild deletes temporary files after a successful build. This displays the setup of environment variables followed by for example:

cd '/builddir/build/BUILD'
rm -rf 'cello-1.0'
/usr/bin/gzip -dc '/builddir/build/SOURCES/cello-1.0.tar.gz' | /usr/bin/tar -xof -
STATUS=$?
if [ $STATUS -ne 0 ]; then
  exit $STATUS
fi
cd 'cello-1.0'
/usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .

The %setup macro:

Ensures that we are working in the correct directory.
Removes residues of previous builds.
Unpacks the source tarball.
Sets up some default privileges.

4.2.2.1. Using the %setup -q macro

The -q option limits the verbosity of the %setup macro. Only tar -xof is executed instead of tar -xvvof. Use this option as the first option.

4.2.2.2. Using the %setup -n macro

The -n option is used to specify the name of the directory from expanded tarball.

This is used in cases when the directory from expanded tarball has a different name from what is expected (%{name}-%{version}), which can lead to an error of the %setup macro.

For example, if the package name is cello, but the source code is archived in hello-1.0.tgz and contains the hello/ directory, the SPEC file content needs to be as follows:

Name: cello
Source0: https://example.com/%{name}/release/hello-%{version}.tar.gz
…
%prep
%setup -n hello

4.2.2.3. Using the %setup -c macro

The -c option is used if the source code tarball does not contain any subdirectories and after unpacking, files from an archive fills the current directory.

The -c option then creates the directory and steps into the archive expansion as shown below:

/usr/bin/mkdir -p cello-1.0
cd 'cello-1.0'

The directory is not changed after archive expansion.

4.2.2.4. Using the %setup -D and %setup -T macros

The -D option disables deleting of source code directory, and is particularly useful if the %setup macro is used several times. With the -D option, the following lines are not used:

rm -rf 'cello-1.0'

The -T option disables expansion of the source code tarball by removing the following line from the script:

/usr/bin/gzip -dc '/builddir/build/SOURCES/cello-1.0.tar.gz' | /usr/bin/tar -xvvof -

4.2.2.5. Using the %setup -a and %setup -b macros

The -a and -b options expand specific sources:

The -b option stands for before, and it expands specific sources before entering the working directory. The -a option stands for after, and it expands those sources after entering. Their arguments are source numbers from the SPEC file preamble.

In the following example, the cello-1.0.tar.gz archive contains an empty examples directory. The examples are shipped in a separate examples.tar.gz tarball and they expand into the directory of the same name. In this case, use -a 1, if you want to expand Source1 after entering the working directory:

Source0: https://example.com/%{name}/release/%{name}-%{version}.tar.gz
Source1: examples.tar.gz
…
%prep
%setup -a 1

In the following example, examples are provided in a separate cello-1.0-examples.tar.gz tarball, which expands into cello-1.0/examples. In this case, use -b 1, to expand Source1 before entering the working directory:

Source0: https://example.com/%{name}/release/%{name}-%{version}.tar.gz
Source1: %{name}-%{version}-examples.tar.gz
…
%prep
%setup -b 1

4.2.3. Common RPM macros in the %files section

The following table lists advanced RPM Macros that are needed in the %files section of a SPEC file.

Tableau 4.1. Advanced RPM Macros in the %files section

Macro	Définition
%license	The macro identifies the file listed as a LICENSE file and it will be installed and labeled as such by RPM. Example: `%license LICENSE`
%doc	The macro identifies a file listed as documentation and it will be installed and labeled as such by RPM. The macro is used for documentation about the packaged software and also for code examples and various accompanying items. In the event code examples are included, care should be taken to remove executable mode from the file. Example: `%doc README`
%dir	The macro ensures that the path is a directory owned by this RPM. This is important so that the RPM file manifest accurately knows what directories to clean up on uninstall. Example: `%dir %{_libdir}/%{name}`
%config(noreplace)	The macro ensures that the following file is a configuration file and therefore should not be overwritten (or replaced) on a package install or update if the file has been modified from the original installation checksum. If there is a change, the file will be created with `.rpmnew` appended to the end of the filename upon upgrade or install so that the pre-existing or modified file on the target system is not modified. Example: `%config(noreplace) %{_sysconfdir}/%{name}/%{name}.conf`

4.2.4. Displaying the built-in macros

Red Hat Enterprise Linux provides multiple built-in RPM macros.

Procédure

To display all built-in RPM macros, run:
```
rpm --showrc
```
Note
The output is quite sizeable. To narrow the result, use the command above with the grep command.
To find information about the RPMs macros for your system’s version of RPM, run:
```
rpm -ql rpm
```
Note
RPM macros are the files titled macros in the output directory structure.

4.2.5. RPM distribution macros

Different distributions provide different sets of recommended RPM macros based on the language implementation of the software being packaged or the specific guidelines of the distribution.

The sets of recommended RPM macros are often provided as RPM packages, ready to be installed with the dnf package manager.

Once installed, the macro files can be found in the /usr/lib/rpm/macros.d/ directory.

Procédure

To display the raw RPM macro definitions, run:
```
rpm --showrc
```

The above output displays the raw RPM macro definitions.

To determine what a macro does and how it can be helpful when packaging RPMs, run the rpm --eval command with the name of the macro used as its argument:
```
rpm --eval %{_MACRO}
```

Ressources supplémentaires

rpm man page

4.2.6. Creating custom macros

You can override the distribution macros in the ~/.rpmmacros file with your custom macros. Any changes that you make affect every build on your machine.

Avertissement

Defining any new macros in the ~/.rpmmacros file is not recommended. Such macros would not be present on other machines, where users may want to try to rebuild your package.

Procédure

To override a macro, run:

%_topdir /opt/some/working/directory/rpmbuild

You can create the directory from the example above, including all subdirectories through the rpmdev-setuptree utility. The value of this macro is by default ~/rpmbuild.

%_smp_mflags -l3

The macro above is often used to pass to Makefile, for example make %{?_smp_mflags}, and to set a number of concurrent processes during the build phase. By default, it is set to -jX, where X is a number of cores. If you alter the number of cores, you can speed up or slow down a build of packages.

4.3. Epoch, Scriptlets and Triggers

This section covers Epoch, Scriptlets, and Triggers, which represent advanced directives for RMP SPEC files.

All these directives influence not only the SPEC file, but also the end machine on which the resulting RPM is installed.

4.3.1. The Epoch directive

The Epoch directive enables to define weighted dependencies based on version numbers.

If this directive is not listed in the RPM SPEC file, the Epoch directive is not set at all. This is contrary to common belief that not setting Epoch results in an Epoch of 0. However, the dnf utility treats an unset Epoch as the same as an Epoch of 0 for the purposes of depsolving.

However, listing Epoch in a SPEC file is usually omitted because in majority of cases introducing an Epoch value skews the expected RPM behavior when comparing versions of packages.

Exemple 4.2. Using Epoch

If you install the foobar package with Epoch: 1 and Version: 1.0, and someone else packages foobar with Version: 2.0 but without the Epoch directive, the new version will never be considered an update. The reason being that the Epoch version is preferred over the traditional Name-Version-Release marker that signifies versioning for RPM Packages.

Using of Epoch is thus quite rare. However, Epoch is typically used to resolve an upgrade ordering issue. The issue can appear as a side effect of upstream change in software version number schemes or versions incorporating alphabetical characters that cannot always be compared reliably based on encoding.

4.3.2. Scriptlets directives

Scriptlets are a series of RPM directives that are executed before or after packages are installed or deleted.

Use Scriptlets only for tasks that cannot be done at build time or in an start up script.

A set of common Scriptlet directives exists. They are similar to the SPEC file section headers, such as %build or %install. They are defined by multi-line segments of code, which are often written as a standard POSIX shell script. However, they can also be written in other programming languages that RPM for the target machine’s distribution accepts. RPM Documentation includes an exhaustive list of available languages.

The following table includes Scriptlet directives listed in their execution order. Note that a package containing the scripts is installed between the %pre and %post directive, and it is uninstalled between the %preun and %postun directive.

Tableau 4.2. Scriptlet directives

Directive	Définition
`%pretrans`	Scriptlet that is executed just before installing or removing any package.
`%pre`	Scriptlet that is executed just before installing the package on the target system.
`%post`	Scriptlet that is executed just after the package was installed on the target system.
`%preun`	Scriptlet that is executed just before uninstalling the package from the target system.
`%postun`	Scriptlet that is executed just after the package was uninstalled from the target system.
`%posttrans`	Scriptlet that is executed at the end of the transaction.

4.3.3. Turning off a scriptlet execution

The following procedure describes how to turn off the execution of any scriptlet using the rpm command together with the --no_scriptlet_name_ option.

Procédure

For example, to turn off the execution of the %pretrans scriptlets, run:
```
# rpm --nopretrans
```
You can also use the -- noscripts option, which is equivalent to all of the following:
- --nopre
- --nopost
- --nopreun
- --nopostun
- --nopretrans
- --noposttrans

Ressources supplémentaires

rpm(8) man page.

4.3.4. Scriptlets macros

The Scriptlets directives also work with RPM macros.

The following example shows the use of systemd scriptlet macro, which ensures that systemd is notified about a new unit file.

$ rpm --showrc | grep systemd
-14: __transaction_systemd_inhibit      %{__plugindir}/systemd_inhibit.so
-14: _journalcatalogdir /usr/lib/systemd/catalog
-14: _presetdir /usr/lib/systemd/system-preset
-14: _unitdir   /usr/lib/systemd/system
-14: _userunitdir       /usr/lib/systemd/user
/usr/lib/systemd/systemd-binfmt %{?*} >/dev/null 2>&1 || :
/usr/lib/systemd/systemd-sysctl %{?*} >/dev/null 2>&1 || :
-14: systemd_post
-14: systemd_postun
-14: systemd_postun_with_restart
-14: systemd_preun
-14: systemd_requires
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
-14: systemd_user_post  %systemd_post --user --global %{?*}
-14: systemd_user_postun        %{nil}
-14: systemd_user_postun_with_restart   %{nil}
-14: systemd_user_preun
systemd-sysusers %{?*} >/dev/null 2>&1 || :
echo %{?*} | systemd-sysusers - >/dev/null 2>&1 || :
systemd-tmpfiles --create %{?*} >/dev/null 2>&1 || :

$ rpm --eval %{systemd_post}

if [ $1 -eq 1 ] ; then
        # Initial installation
        systemctl preset  >/dev/null 2>&1 || :
fi

$ rpm --eval %{systemd_postun}

systemctl daemon-reload >/dev/null 2>&1 || :

$ rpm --eval %{systemd_preun}

if [ $1 -eq 0 ] ; then
        # Package removal, not upgrade
        systemctl --no-reload disable  > /dev/null 2>&1 || :
        systemctl stop  > /dev/null 2>&1 || :
fi

4.3.5. The Triggers directives

Triggers are RPM directives which provide a method for interaction during package installation and uninstallation.

Avertissement

Triggers may be executed at an unexpected time, for example on update of the containing package. Triggers are difficult to debug, therefore they need to be implemented in a robust way so that they do not break anything when executed unexpectedly. For these reasons, Red Hat recommends to minimize the use of Triggers.

The order of execution on a single package upgrade and the details for each existing Triggers are listed below:

all-%pretrans
…
any-%triggerprein (%triggerprein from other packages set off by new install)
new-%triggerprein
new-%pre      for new version of package being installed
…           (all new files are installed)
new-%post     for new version of package being installed

any-%triggerin (%triggerin from other packages set off by new install)
new-%triggerin
old-%triggerun
any-%triggerun (%triggerun from other packages set off by old uninstall)

old-%preun    for old version of package being removed
…           (all old files are removed)
old-%postun   for old version of package being removed

old-%triggerpostun
any-%triggerpostun (%triggerpostun from other packages set off by old un
            install)
…
all-%posttrans

The above items are found in the /usr/share/doc/rpm-4.*/triggers file.

4.3.6. Using non-shell scripts in a SPEC file

The -p scriptlet option in a SPEC file enables the user to invoke a specific interpreter instead of the default shell scripts interpreter (-p /bin/sh).

The following procedure describes how to create a script, which prints out a message after installation of the pello.py program:

Procédure

Open the pello.spec file.

Find the following line:

install -m 0644 %{name}.py* %{buildroot}/usr/lib/%{name}/

Under the above line, insert:

%post -p /usr/bin/python3
print("This is {} code".format("python"))

Build your package as described in Building RPMs.

Install your package:

# dnf install /home/<username>/rpmbuild/RPMS/noarch/pello-0.1.2-1.el8.noarch.rpm

Check the output message after the installation:

Installing       : pello-0.1.2-1.el8.noarch                              1/1
Running scriptlet: pello-0.1.2-1.el8.noarch                              1/1
This is python code

Note

To use a Python 3 script, include the following line under install -m in a SPEC file:

%post -p /usr/bin/python3

To use a Lua script, include the following line under install -m in a SPEC file:

%post -p <lua>

This way, you can specify any interpreter in a SPEC file.

4.4. RPM conditionals

RPM Conditionals enable conditional inclusion of various sections of the SPEC file.

Conditional inclusions usually deal with:

Architecture-specific sections
Operating system-specific sections
Compatibility issues between various versions of operating systems
Existence and definition of macros

4.4.1. RPM conditionals syntax

RPM conditionals use the following syntax:

If expression is true, then do some action:

%if expression
…
%endif

If expression is true, then do some action, in other case, do another action:

%if expression
…
%else
…
%endif

4.4.2. The %if conditionals

This section provides examples of using the %if RPM conditionals.

Exemple 4.3. Using the %if conditional to handle compatibility between Red Hat Enterprise Linux 8 and other operating systems

%if 0%{?rhel} == 8
sed -i '/AS_FUNCTION_DESCRIBE/ s/^/#/' configure.in
sed -i '/AS_FUNCTION_DESCRIBE/ s/^/#/' acinclude.m4
%endif

This conditional handles compatibility between RHEL 8 and other operating systems in terms of support of the AS_FUNCTION_DESCRIBE macro. If the package is built for RHEL, the %rhel macro is defined, and it is expanded to RHEL version. If its value is 8, meaning the package is build for RHEL 8, then the references to AS_FUNCTION_DESCRIBE, which is not supported by RHEL 8, are deleted from autoconfig scripts.

Exemple 4.4. Using the %if conditional to handle definition of macros

%define ruby_archive %{name}-%{ruby_version}
%if 0%{?milestone:1}%{?revision:1} != 0
%define ruby_archive %{ruby_archive}-%{?milestone}%{?!milestone:%{?revision:r%{revision}}}
%endif

This conditional handles definition of macros. If the %milestone or the %revision macros are set, the %ruby_archive macro, which defines the name of the upstream tarball, is redefined.

4.4.3. Specialized variants of %if conditionals

The %ifarch conditional, %ifnarch conditional and %ifos conditional are specialized variants of the %if conditionals. These variants are commonly used, hence they have their own macros.

The %ifarch conditional

The %ifarch conditional is used to begin a block of the SPEC file that is architecture-specific. It is followed by one or more architecture specifiers, each separated by commas or whitespace.

Exemple 4.5. An example use of the %ifarch conditional

%ifarch i386 sparc
…
%endif

All the contents of the SPEC file between %ifarch and %endif are processed only on the 32-bit AMD and Intel architectures or Sun SPARC-based systems.

The %ifnarch conditional

The %ifnarch conditional has a reverse logic than %ifarch conditional.

Exemple 4.6. An example use of the %ifnarch conditional

%ifnarch alpha
…
%endif

All the contents of the SPEC file between %ifnarch and %endif are processed only if not done on a Digital Alpha/AXP-based system.

The %ifos conditional

The %ifos conditional is used to control processing based on the operating system of the build. It can be followed by one or more operating system names.

Exemple 4.7. An example use of the %ifos conditional

%ifos linux
…
%endif

All the contents of the SPEC file between %ifos and %endif are processed only if the build was done on a Linux system.

4.5. Emballage des RPMs de Python 3

Vous pouvez installer des paquets Python sur votre système soit à partir du dépôt PyPI en amont en utilisant le programme d'installation pip, soit en utilisant le gestionnaire de paquets DNF. DNF utilise le format de paquetage RPM, qui offre plus de contrôle en aval sur le logiciel.

Le format d'empaquetage des paquets Python natifs est défini par les spécifications de la Python Packaging Authority (PyPA). La plupart des projets Python utilisent les utilitaires distutils ou setuptools pour l'empaquetage et définissent des informations sur les paquets dans le fichier setup.py. Cependant, les possibilités de créer des paquets Python natifs ont évolué au fil du temps. Pour plus d'informations sur les normes d'empaquetage émergentes, voir pyproject-rpm-macros.

Ce chapitre décrit comment empaqueter un projet Python qui utilise setup.py dans un paquetage RPM. Cette approche présente les avantages suivants par rapport aux paquets Python natifs :

Les dépendances sur les paquets Python et non-Python sont possibles et strictement appliquées par le gestionnaire de paquets DNF.
Vous pouvez signer les paquets de manière cryptographique. La signature cryptographique permet de vérifier, d'intégrer et de tester le contenu des paquets RPM avec le reste du système d'exploitation.
Vous pouvez exécuter des tests pendant le processus de construction.

4.5.1. Description du fichier SPEC pour un paquetage Python

Un fichier SPEC contient des instructions que l'utilitaire rpmbuild utilise pour construire un RPM. Les instructions sont incluses dans une série de sections. Un fichier SPEC se compose de deux parties principales dans lesquelles les sections sont définies :

Préambule (contient une série de métadonnées utilisées dans le corps du texte)
Corps (contient la partie principale des instructions)

Un fichier RPM SPEC pour les projets Python présente certaines spécificités par rapport aux fichiers RPM SPEC non-Python.

Important

Le nom de tout paquetage RPM d'une bibliothèque Python doit toujours inclure le préfixe python3- ou python3.11-.

D'autres particularités sont présentées dans l'exemple de fichier SPEC suivant pour le paquet python3*-pello. Pour la description de ces spécificités, voir les notes sous l'exemple.

%global python3_pkgversion 3.11                                       1

Name:           python-pello                                          2
Version:        1.0.2
Release:        1%{?dist}
Summary:        Example Python library

License:        MIT
URL:            https://github.com/fedora-python/Pello
Source:         %{url}/archive/v%{version}/Pello-%{version}.tar.gz

BuildArch:      noarch
BuildRequires:  python%{python3_pkgversion}-devel                     3

# Build dependencies needed to be specified manually
BuildRequires:  python%{python3_pkgversion}-setuptools

# Test dependencies needed to be specified manually
# Also runtime dependencies need to be BuildRequired manually to run tests during build
BuildRequires:  python%{python3_pkgversion}-pytest >= 3


%global _description %{expand:
Pello is an example package with an executable that prints Hello World! on the command line.}

%description %_description

%package -n python%{python3_pkgversion}-pello                         4
Summary:        %{summary}

%description -n python%{python3_pkgversion}-pello %_description


%prep
%autosetup -p1 -n Pello-%{version}


%build
# The macro only supported projects with setup.py
%py3_build                                                            5


%install
# The macro only supported projects with setup.py
%py3_install


%check                                                                6
%{pytest}


# Note that there is no %%files section for the unversioned python module
%files -n python%{python3_pkgversion}-pello
%doc README.md
%license LICENSE.txt
%{_bindir}/pello_greeting

# The library files needed to be listed manually
%{python3_sitelib}/pello/

# The metadata files needed to be listed manually
%{python3_sitelib}/Pello-*.egg-info/

1: En définissant la macro python3_pkgversion, vous définissez la version de Python pour laquelle ce paquet sera construit. Pour construire pour la version 3.9 de Python, mettez la macro à sa valeur par défaut 3 ou supprimez entièrement la ligne.
2: Lorsque vous compilez un projet Python dans un RPM, ajoutez toujours le préfixe python- au nom original du projet. Le nom original est ici pello et, par conséquent, le name of the Source RPM (SRPM) est python-pello.
3: BuildRequires spécifie les paquets nécessaires pour construire et tester ce paquet. Dans BuildRequires, incluez toujours les éléments fournissant les outils nécessaires à la construction des paquets Python : python3-devel (ou python3.11-devel) et les projets pertinents nécessaires au logiciel spécifique que vous empaquetez, par exemple, python3-setuptools (ou python3.11-setuptools) ou les dépendances d'exécution et de test nécessaires à l'exécution des tests dans la section \feck.
4: Lorsque vous choisissez un nom pour le RPM binaire (le paquet que les utilisateurs pourront installer), ajoutez un préfixe de version de Python. Utilisez le préfixe python3- pour Python 3.9 par défaut ou le préfixe python3.11- pour Python 3.11. Vous pouvez utiliser la macro %{python3_pkgversion}, qui évalue 3 pour la version 3.9 de Python par défaut, à moins que vous ne lui attribuiez une version explicite, par exemple 3.11 (voir note de bas de page 1).
5: Les macros %py3_build et %py3_install exécutent respectivement les commandes setup.py build et setup.py install, avec des arguments supplémentaires pour spécifier les emplacements d'installation, l'interpréteur à utiliser et d'autres détails.
6: La section \feck doit exécuter les tests du projet empaqueté. La commande exacte dépend du projet lui-même, mais il est possible d'utiliser la macro %pytest pour exécuter la commande pytest d'une manière adaptée à RPM.

4.5.2. Macros communes pour les RPMs Python 3

Dans un fichier SPEC, utilisez toujours les macros décrites dans le tableau suivant Macros for Python 3 RPMs plutôt que de coder en dur leurs valeurs. Vous pouvez redéfinir la version de Python 3 utilisée dans ces macros en définissant la macro python3_pkgversion au sommet de votre fichier SPEC (voir Section 4.5.1, « Description du fichier SPEC pour un paquetage Python »). Si vous définissez la macro python3_pkgversion, les valeurs des macros décrites dans le tableau suivant refléteront la version de Python 3 spécifiée.

Tableau 4.3. Macros pour les RPM de Python 3

Macro	Définition normale	Description
%{python3_pkgversion}	3	La version de Python utilisée par toutes les autres macros. Peut être redéfinie à `3.11` pour utiliser Python 3.11
%{python3}	/usr/bin/python3	L'interpréteur Python 3
%{python3_version}	3.9	La version majeure et mineure de l'interpréteur Python 3
%{python3_sitelib}	/usr/lib/python3.9/site-packages	L'emplacement où les modules Pure-Python sont installés
%{python3_sitearch}	/usr/lib64/python3.9/site-packages	Emplacement où sont installés les modules contenant des modules d'extension spécifiques à l'architecture
%py3_build		Exécute la commande `setup.py build` avec des arguments adaptés à un paquetage RPM
%py3_install		Exécute la commande `setup.py install` avec des arguments adaptés à un paquetage RPM
%{py3_shebang_flags}	s	L'ensemble des drapeaux par défaut pour la macro des directives de l'interpréteur Python, `%py3_shebang_fix`
%py3_shebang_fix		Modifie les directives de l'interpréteur Python en `#! %{python3}`, préserve les drapeaux existants (s'ils existent) et ajoute les drapeaux définis dans la macro `%{py3_shebang_flags}`

Ressources supplémentaires

Macros Python dans la documentation en amont

4.5.3. Utilisation des dépendances générées automatiquement pour les RPM Python

La procédure suivante décrit comment utiliser les dépendances générées automatiquement lors de l'empaquetage d'un projet Python sous forme de RPM.

Conditions préalables

Il existe un fichier SPEC pour le RPM. Pour plus d'informations, voir Description du fichier SPEC pour un paquetage Python.

Procédure

Assurez-vous que l'un des répertoires suivants contenant les métadonnées fournies en amont est inclus dans le RPM résultant :
- .dist-info
- .egg-info
  Le processus de construction du RPM génère automatiquement des versions virtuelles de pythonX.Ydist à partir de ces répertoires, par exemple :
```
python3.9dist(pello)
```
  Le générateur de dépendances Python lit ensuite les métadonnées en amont et génère des exigences d'exécution pour chaque paquet RPM en utilisant les pythonX.Ydist virtual provides générés. Par exemple, une balise d'exigences générée peut ressembler à ce qui suit :
```
Requires: python3.9dist(requests)
```
Inspecter les demandes générées.
Pour supprimer certaines des exigences générées, utilisez l'une des approches suivantes :
1. Modifier les métadonnées fournies en amont dans la section %prep du fichier SPEC.
2. Utiliser le filtrage automatique des dépendances décrit dans la documentation en amont.
Pour désactiver le générateur automatique de dépendances, incluez la macro %{?python_disable_dependency_generator} au-dessus de la déclaration Þscription du paquet principal.

Ressources supplémentaires

Dépendances générées automatiquement

4.6. Gestion des directives de l'interpréteur dans les scripts Python

Dans Red Hat Enterprise Linux 9, les scripts Python exécutables sont censés utiliser des directives d'interpréteur (également connues sous le nom de hashbangs ou shebangs) qui spécifient explicitement au minimum la version majeure de Python. Par exemple :

#!/usr/bin/python3
#!/usr/bin/python3.9
#!/usr/bin/python3.11

Le script /usr/lib/rpm/redhat/brp-mangle-shebangs buildroot policy (BRP) est exécuté automatiquement lors de la construction de tout paquetage RPM et tente de corriger les directives de l'interpréteur dans tous les fichiers exécutables.

Le script BRP génère des erreurs lorsqu'il rencontre un script Python avec une directive d'interprétation ambiguë, telle que :

#!/usr/bin/python

#!/usr/bin/env python

4.6.1. Modifier les directives de l'interpréteur dans les scripts Python

Utilisez la procédure suivante pour modifier les directives de l'interpréteur dans les scripts Python qui provoquent des erreurs de compilation au moment de la compilation du RPM.

Conditions préalables

Certaines directives de l'interpréteur dans vos scripts Python provoquent une erreur de compilation.

Procédure

Pour modifier les directives de l'interpréteur, effectuez l'une des tâches suivantes :
- Utilisez la macro suivante dans la section %prep de votre fichier SPEC :
```
# %py3_shebang_fix SCRIPTNAME..
```
  SCRIPTNAME peut être un fichier, un répertoire ou une liste de fichiers et de répertoires.
  En conséquence, tous les fichiers listés et tous les fichiers .py dans les répertoires listés verront leurs directives d'interprétation modifiées pour pointer vers %{python3}. Les drapeaux existants de la directive d'interprétation originale seront préservés et des drapeaux supplémentaires définis dans la macro %{py3_shebang_flags} seront ajoutés. Vous pouvez redéfinir la macro %{py3_shebang_flags} dans votre fichier SPEC pour modifier les drapeaux qui seront ajoutés.
- Appliquer le script pathfix.py du paquet python3-devel:
```
# pathfix.py -pn -i %{python3} PATH ..
```
  Vous pouvez spécifier plusieurs chemins. Si un PATH est un répertoire, pathfix.py recherche de manière récursive tous les scripts Python correspondant au modèle ^[a-zA-Z0-9_] \.py$, et pas seulement ceux dont la directive d'interprétation est ambiguë. Ajoutez la commande ci-dessus à la section %prep ou à la fin de la section %install.
- Modifiez les scripts Python fournis afin qu'ils soient conformes au format attendu. À cette fin, vous pouvez également utiliser le script pathfix.py en dehors du processus de compilation du RPM. Lorsque vous exécutez pathfix.py en dehors d'une compilation RPM, remplacez %{python3} de l'exemple précédent par un chemin d'accès à la directive de l'interpréteur, tel que /usr/bin/python3 ou /usr/bin/python3.11.

Ressources supplémentaires

Invocation de l'interprète

4.7. RubyGems packages

This section explains what RubyGems packages are, and how to re-package them into RPM.

4.7.1. What RubyGems are

Ruby is a dynamic, interpreted, reflective, object-oriented, general-purpose programming language.

Programs written in Ruby are typically packaged using the RubyGems project, which provides a specific Ruby packaging format.

Packages created by RubyGems are called gems, and they can be re-packaged into RPM as well.

Note

This documentation refers to terms related to the RubyGems concept with the gem prefix, for example .gemspec is used for the gem specification, and terms related to RPM are unqualified.

4.7.2. How RubyGems relate to RPM

RubyGems represent Ruby’s own packaging format. However, RubyGems contain metadata similar to those needed by RPM, which enables the conversion from RubyGems to RPM.

According to Ruby Packaging Guidelines, it is possible to re-package RubyGems packages into RPM in this way:

Such RPMs fit with the rest of the distribution.
End users are able to satisfy dependencies of a gem by installing the appropriate RPM-packaged gem.

RubyGems use similar terminology as RPM, such as SPEC files, package names, dependencies and other items.

To fit into the rest of RHEL RPM distribution, packages created by RubyGems must follow the conventions listed below:

Names of gems must follow this pattern:
```
rubygem-%{gem_name}
```
To implement a shebang line, the following string must be used:
```
#!/usr/bin/ruby
```

4.7.3. Creating RPM packages from RubyGems packages

To create a source RPM for a RubyGems package, the following files are needed:

A gem file
An RPM SPEC file

The following sections describe how to create RPM packages from packages created by RubyGems.

4.7.3.1. RubyGems SPEC file conventions

A RubyGems SPEC file must meet the following conventions:

Contain a definition of %{gem_name}, which is the name from the gem’s specification.
The source of the package must be the full URL to the released gem archive; the version of the package must be the gem’s version.
Contain the BuildRequires: a directive defined as follows to be able to pull in the macros needed to build.
```
BuildRequires:rubygems-devel
```
Not contain any RubyGems Requires or Provides, because those are autogenerated.
Not contain the BuildRequires: directive defined as follows, unless you want to explicitly specify Ruby version compatibility:
```
Requires: ruby(release)
```
The automatically generated dependency on RubyGems (Requires: ruby(rubygems)) is sufficient.

4.7.3.2. RubyGems macros

The following table lists macros useful for packages created by RubyGems. These macros are provided by the rubygems-devel packages.

Tableau 4.4. RubyGems' macros

Macro name	Extended path	Utilisation
%{gem_dir}	/usr/share/gems	Top directory for the gem structure.
%{gem_instdir}	%{gem_dir}/gems/%{gem_name}-%{version}	Directory with the actual content of the gem.
%{gem_libdir}	%{gem_instdir}/lib	The library directory of the gem.
%{gem_cache}	%{gem_dir}/cache/%{gem_name}-%{version}.gem	The cached gem.
%{gem_spec}	%{gem_dir}/specifications/%{gem_name}-%{version}.gemspec	The gem specification file.
%{gem_docdir}	%{gem_dir}/doc/%{gem_name}-%{version}	The RDoc documentation of the gem.
%{gem_extdir_mri}	%{_libdir}/gems/ruby/%{gem_name}-%{version}	The directory for gem extension.

4.7.3.3. RubyGems SPEC file example

This section provides an example SPEC file for building gems together with an explanation of its particular sections.

An example RubyGems SPEC file

%prep
%setup -q -n  %{gem_name}-%{version}

# Modify the gemspec if necessary
# Also apply patches to code if necessary
%patch0 -p1

%build
# Create the gem as gem install only works on a gem file
gem build ../%{gem_name}-%{version}.gemspec

# %%gem_install compiles any C extensions and installs the gem into ./%%gem_dir
# by default, so that we can move it into the buildroot in %%install
%gem_install

%install
mkdir -p %{buildroot}%{gem_dir}
cp -a ./%{gem_dir}/* %{buildroot}%{gem_dir}/

# If there were programs installed:
mkdir -p %{buildroot}%{_bindir}
cp -a ./%{_bindir}/* %{buildroot}%{_bindir}

# If there are C extensions, copy them to the extdir.
mkdir -p %{buildroot}%{gem_extdir_mri}
cp -a .%{gem_extdir_mri}/{gem.build_complete,*.so} %{buildroot}%{gem_extdir_mri}/

The following table explains the specifics of particular items in a RubyGems SPEC file:

Tableau 4.5. RubyGems' SPEC directives specifics

SPEC directive RubyGems specifics

SPEC directive	RubyGems specifics
%prep	RPM can directly unpack gem archives, so you can run the `gem unpack` comamnd to extract the source from the gem. The `%setup -n %{gem_name}-%{version}` macro provides the directory into which the gem has been unpacked. At the same directory level, the `%{gem_name}-%{version}.gemspec` file is automatically created, which can be used to rebuild the gem later, to modify the `.gemspec`, or to apply patches to the code.
%build	This directive includes commands or series of commands for building the software into machine code. The `%gem_install` macro operates only on gem archives, and the gem is recreated with the next gem build. The gem file that is created is then used by `%gem_install` to build and install the code into the temporary directory, which is `./%{gem_dir}` by default. The `%gem_install` macro both builds and installs the code in one step. Before being installed, the built sources are placed into a temporary directory that is created automatically. The `%gem_install` macro accepts two additional options: `-n <gem_file>`, which allows to override gem used for installation, and `-d <install_dir>`, which might override the gem installation destination; using this option is not recommended. The `%gem_install` macro must not be used to install into the `%{buildroot}`.
%install	The installation is performed into the `%{buildroot}` hierarchy. You can create the directories that you need and then copy what was installed in the temporary directories into the `%{buildroot}` hierarchy. If this gem creates shared objects, they are moved into the architecture-specific `%{gem_extdir_mri}` path.

%prep

RPM can directly unpack gem archives, so you can run the gem unpack comamnd to extract the source from the gem. The %setup -n %{gem_name}-%{version} macro provides the directory into which the gem has been unpacked. At the same directory level, the %{gem_name}-%{version}.gemspec file is automatically created, which can be used to rebuild the gem later, to modify the .gemspec, or to apply patches to the code.

%build

This directive includes commands or series of commands for building the software into machine code. The %gem_install macro operates only on gem archives, and the gem is recreated with the next gem build. The gem file that is created is then used by %gem_install to build and install the code into the temporary directory, which is ./%{gem_dir} by default. The %gem_install macro both builds and installs the code in one step. Before being installed, the built sources are placed into a temporary directory that is created automatically.

The %gem_install macro accepts two additional options: -n <gem_file>, which allows to override gem used for installation, and -d <install_dir>, which might override the gem installation destination; using this option is not recommended.

The %gem_install macro must not be used to install into the %{buildroot}.

%install

The installation is performed into the %{buildroot} hierarchy. You can create the directories that you need and then copy what was installed in the temporary directories into the %{buildroot} hierarchy. If this gem creates shared objects, they are moved into the architecture-specific %{gem_extdir_mri} path.

Ressources supplémentaires

Ruby Packaging Guidelines

4.7.3.4. Converting RubyGems packages to RPM SPEC files with gem2rpm

The gem2rpm utility converts RubyGems packages to RPM SPEC files.

Les sections suivantes décrivent comment :

Install the gem2rpm utility
Display all gem2rpm options
Use gem2rpm to covert RubyGems packages to RPM SPEC files
Edit gem2rpm templates

4.7.3.4.1. Installing gem2rpm

The following procedure describes how to install the gem2rpm utility.

Procédure

To install gem2rpm from RubyGems.org, run:

$ gem install gem2rpm

4.7.3.4.2. Displaying all options of gem2rpm

The following procedure describes how to display all options of the gem2rpm utility.

Procédure

To see all options of gem2rpm, run:
```
gem2rpm --help
```

4.7.3.4.3. Using gem2rpm to covert RubyGems packages to RPM SPEC files

The following procedure describes how to use the gem2rpm utility to covert RubyGems packages to RPM SPEC files.

Procédure

Download a gem in its latest version, and generate the RPM SPEC file for this gem:
```
$ gem2rpm --fetch <gem_name> > <gem_name>.spec
```

The described procedure creates an RPM SPEC file based on the information provided in the gem’s metadata. However, the gem misses some important information that is usually provided in RPMs, such as the license and the changelog. The generated SPEC file thus needs to be edited.

4.7.3.4.4. gem2rpm templates

The gem2rpm template is a standard Embedded Ruby (ERB) file, which includes variables listed in the following table.

Tableau 4.6. Variables in the gem2rpm template

Variable	Explication
package	The `Gem::Package` variable for the gem.
spécimen	The `Gem::Specification` variable for the gem (the same as format.spec).
config	The `Gem2Rpm::Configuration` variable that can redefine default macros or rules used in spec template helpers.
runtime_dependencies	The `Gem2Rpm::RpmDependencyList` variable providing a list of package runtime dependencies.
development_dependencies	The `Gem2Rpm::RpmDependencyList` variable providing a list of package development dependencies.
tests	The `Gem2Rpm::TestSuite` variable providing a list of test frameworks allowing their execution.
files	The `Gem2Rpm::RpmFileList` variable providing an unfiltered list of files in a package.
main_files	The `Gem2Rpm::RpmFileList` variable providing a list of files suitable for the main package.
doc_files	The `Gem2Rpm::RpmFileList` variable providing a list of files suitable for the `-doc` subpackage.
format	The `Gem::Format` variable for the gem. Note that this variable is now deprecated.

4.7.3.4.5. Listing available gem2rpm templates

Use the following procedure describes to list all available gem2rpm templates.

Procédure

To see all available templates, run:
```
$ gem2rpm --templates
```

4.7.3.4.6. Editing gem2rpm templates

You can edit the template from which the RPM SPEC file is generated instead of editing the generated SPEC file.

Use the following procedure to edit the gem2rpm templates.

Procédure

Save the default template:

$ gem2rpm -T > rubygem-<gem_name>.spec.template

Edit the template as needed.

Generate the SPEC file using the edited template:

$ gem2rpm -t rubygem-<gem_name>.spec.template <gem_name>-<latest_version.gem > <gem_name>-GEM.spec

You can now build an RPM package using the edited template as described in Building RPMs.

4.8. How to handle RPM packages with Perls scripts

Since RHEL 8, the Perl programming language is not included in the default buildroot. Therefore, the RPM packages that include Perl scripts must explicitly indicate the dependency on Perl using the BuildRequires: directive in RPM SPEC file.

4.8.2. Using a specific Perl module

If a specific Perl module is required at build time, use the following procedure:

Procédure

Apply the following syntax in your RPM SPEC file:
```
BuildRequires: perl(MODULE)
```
Note
Apply this syntax to Perl core modules as well, because they can move in and out of the perl package over time.

4.8.3. Limiting a package to a specific Perl version

To limit your package to a specific Perl version, follow this procedure:

Procédure

Use the perl(:VERSION) dependency with the desired version constraint in your RPM SPEC file:
For example, to limit a package to Perl version 5.30 and higher, use:
```
BuildRequires: perl(:VERSION) >= 5.30
```

Avertissement

Do not use a comparison against the version of the perl package because it includes an epoch number.

4.8.4. Ensuring that a package uses the correct Perl interpreter

Red Hat provides multiple Perl interpreters, which are not fully compatible. Therefore, any package that delivers a Perl module must use at run time the same Perl interpreter that was used at build time.

To ensure this, follow the procedure below:

Procédure

Include versioned MODULE_COMPAT Requires in RPM SPEC file for any package that delivers a Perl module:
```
Requires:  perl(:MODULE_COMPAT_%(eval `perl -V:version`; echo $version))
```

Chapitre 5. New features in RHEL 9

This section documents the most notable changes in RPM packaging between Red Hat Enterprise Linux 8 and 9.

5.1. Dynamic build dependencies

Red Hat Enterprise Linux 9 introduces the %generate_buildrequires section that enables generating dynamic build dependencies.

Additional build dependencies can now be generated programmatically at RPM build time, using the newly available %generate_buildrequires script. This is useful when packaging software written in a language in which a specialized utility is commonly used to determine run-time or build-time dependencies, such as Rust, Golang, Node.js, Ruby, Python, or Haskell.

You can use the %generate_buildrequires script to dynamically determine which BuildRequires directives are added to a SPEC file at build-time. If present, %generate_buildrequires is executed after the %prep section and can access the unpacked and patched source files. The script must print the found build dependencies to standard output using the same syntax as a regular BuildRequires directive.

The rpmbuild utility then checks if the dependencies are met before continuing the build.

If some dependencies are missing, a package with the .buildreqs.nosrc.rpm suffix is created, which contains the found BuildRequires and no source files. You can use this package to install the missing build dependencies with the dnf builddep command before restarting the build.

For more information, see the DYNAMIC BUILD DEPENDENCIES section in the rpmbuild(8) man page.

Ressources supplémentaires

rpmbuild(8) man page
yum-builddep(1) man page

5.2. Improved patch declaration

5.2.1. En option, numérotation automatique des patchs et des sources

The Patch: and Source: tags without a number are now automatically numbered based on the order in which they are listed.

The numbering is run internally by the rpmbuild utility starting from the last manually numbered entry, or 0 if there is no such entry.

Par exemple :

Patch: one.patch
Patch: another.patch
Patch: yet-another.patch

5.2.2. `%patchlist` et `%sourcelist` sections

It is now possible to list patch and source files without preceding each item with the respective Patch: and Source: tags by using the newly added %patchlist and %sourcelist sections.

For example, the following entries:

Patch0: one.patch
Patch1: another.patch
Patch2: yet-another.patch

can now be replaced with:

%patchlist
one.patch
another.patch
yet-another.patch

5.2.3. `topatch` accepte désormais les plages de correctifs

The %autopatch macro now accepts the -m and -M parameters to limit the minimum and maximum patch number to apply, respectively:

The -m parameter specifies the patch number (inclusive) to start at when applying patches.
The -M parameter specifies the patch number (inclusive) to stop at when applying patches.

This feature can be useful when an action needs to be performed in between certain patch sets.

5.3. Autres caractéristiques

Other new features related to RPM packaging in Red Hat Enterprise Linux 9 include:

Générateurs de dépendances rapides basés sur des macros
Powerful macro and %if expressions, including ternary operator and native version comparison
Méta-dépendances (non ordonnées)
Caret version operator (^), which can be used to express a version that is higher than the base version. This operator complements the tilde (~) operator, which has the opposite semantics.
%enif, %enifos et %enifarch déclarations

Chapitre 6. Ressources supplémentaires

This section provides references to various topics related to RPMs, RPM packaging, and RPM building.

Note légale

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.

Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.

Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.

Linux® is the registered trademark of Linus Torvalds in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.

MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.

Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.

The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.

All other trademarks are the property of their respective owners.

Language and Page Formatting Options

Packaging and distributing software

Packaging software by using the RPM package management system

Rendre l'open source plus inclusif

Fournir un retour d'information sur la documentation de Red Hat

Chapitre 1. Getting started with RPM packaging

Chapitre 2. Preparing software for RPM packaging

2.1. What is source code

2.2. How programs are made

2.2.1. Natively Compiled Code

2.2.2. Interpreted Code

2.2.2.1. Raw-interpreted programs

2.2.2.2. Byte-compiled programs

2.3. Building software from source

2.4. Building software from Natively Compiled Code

2.4.1. Manual building

2.4.2. Automated building

2.5. Interpreting code

2.5.1. Byte-compiling code

2.5.2. Raw-interpreting code

2.6. Patching software

2.7. Arbitrary artifacts

2.8. Placing arbitrary artifacts in the system using the install command

2.9. Placing arbitrary artifacts in the system using the make install command

2.10. Preparing source code for packaging

2.11. Putting source code into tarball

Chapitre 3. Packaging software

3.1. Paquets RPM

Types de paquets RPM

3.2. Listing RPM packaging tool’s utilities

3.3. Setting up RPM packaging workspace

3.4. What is a SPEC file

3.4.1. Preamble items

3.4.2. Body items

3.4.3. Advanced items

3.5. BuildRoots

3.6. RPM macros

3.7. Working with SPEC files

3.8. Creating a new SPEC file with rpmdev-newspec

3.9. Modifying an original SPEC file for creating RPMs

3.10. An example SPEC file for a program written in bash

3.11. An example SPEC file for a program written in Python

3.12. An example SPEC file for a program written in C

3.13. Building RPMs

3.14. Building source RPMs

3.15. Rebuilding a binary RPM from a source RPM

3.16. Building a binary RPM from the SPEC file

3.17. Building binary RPMs from source RPMs

3.18. Checking RPMs for sanity

3.19. Checking bello for sanity

3.19.1. Checking the bello SPEC File

3.19.2. Checking the bello binary RPM

3.20. Checking pello for sanity

3.20.1. Checking the pello SPEC File

3.20.2. Checking the pello binary RPM

3.21. Checking cello for sanity

3.21.1. Checking the cello SPEC File

3.21.2. Checking the cello binary RPM

3.22. Logging RPM activity to syslog

3.23. Extracting RPM content

Chapitre 4. Advanced topics

4.1. Signing RPM packages

4.1.1. Creating a GPG key

4.1.2. Configuring RPM to sign a package

4.1.3. Adding a signature to an RPM package

4.2. More on macros

4.2.1. Defining your own macros

4.2.2. Using the %setup macro

4.2.2.1. Using the %setup -q macro

4.2.2.2. Using the %setup -n macro

4.2.2.3. Using the %setup -c macro

4.2.2.4. Using the %setup -D and %setup -T macros

4.2.2.5. Using the %setup -a and %setup -b macros

4.2.3. Common RPM macros in the %files section

4.2.4. Displaying the built-in macros

4.2.5. RPM distribution macros

4.2.6. Creating custom macros

4.3. Epoch, Scriptlets and Triggers

4.3.1. The Epoch directive

4.3.2. Scriptlets directives

5.2.2. `%patchlist` et `%sourcelist` sections

5.2.3. `topatch` accepte désormais les plages de correctifs